Vehicle Inspection & Loading Practice Test, Test 2 of 2
Question 1 of 12
Per the AAMVA CDL Manual, when a standee line is marked by a painted line on the floor, how wide must that line be?
✗
Not quite.
Wrong. The manual specifies a two-inch line, not a one-inch line, when a floor line is used to mark the standee boundary.
The correct answer is B: Two inches.
49 CFR 393.90 (standee line requirement)
✓
Correct!
Correct. The manual states buses designed to allow standing must have a two-inch line on the floor, or some other means of showing riders where they cannot stand.
49 CFR 393.90 (standee line requirement)
✗
Not quite.
Wrong. Four inches is the size given elsewhere in the manual for hazard labels, not the standee line, the standee floor line is specified as two inches.
The correct answer is B: Two inches.
49 CFR 393.90 (standee line requirement)
✗
Not quite.
Wrong. While the manual does allow "some other means" of marking besides a painted line, when a floor line is used it specifies a two-inch width rather than leaving the width completely unspecified.